<li id="qltuu"></li>

    <li id="qltuu"></li>

    <progress id="qltuu"></progress><li id="qltuu"><rp id="qltuu"></rp></li>

    <progress id="qltuu"><tbody id="qltuu"></tbody></progress>
    <rp id="qltuu"><option id="qltuu"></option></rp>

    Today is 2020-12-29 Tuesday,Welcome to this site 

    Common problem

    The function of the angle of the tool

    Word:[Big][Middle][Small] QR Code 2017/11/17     Viewed:    

      No matter what kind of processing is used, the tool has three main angles: the front angle, the cut angle and the rear angle.   The following functions are as follows:
      Front angle: influence the cutting force, the cutting edge strength and the chip flow characteristic;
      Angle of cut: control the direction of the cutting force, reduce the chip effectively, and protect the weak parts of the cutting edge.
      Back angle: to ensure that the cutting tool will not rub with the workpiece during cutting.
      Through the comprehensive optimization of the three angles of the tool, the cutting edge can be strengthened and the workpiece material can flow freely from the cutting area.


    Go Back
    Print
    13955543333
    瀏覽手機站
    色偷一区国产精品